US Shift Quick 2 Gen2 Stand-Alone Transmission Control System
Featuring REVolution Architecture
Currently supporting these popular transmissions:
- GM 4L60E, 4L65E, and 4L70E (2008 and earlier only)
- GM 4L80E and 4L85E
- Ford AOD-E, 4R70W (wide ratio AOD-E), and 4R75
- Ford E4OD and 4R100
The Quick 2 is a simple, inexpensive, and easy-to-use controller based on the Quick 4's REVolution architecture. It's designed for hobbyists and shops who need simple and straightforward transmission control with a proven, robust, and reliable platform. It enables the use of modern, electronic four-speed transmissions on a wide variety of vehicles that lack the OEM capability, such as classic cars, trucks, or motorhomes. It can also be used to enhance a modern vehicle's performance by taking over control from the OEM computer, allowing the user to directly adjust shift points, firmness, torque converter engagement, and much more.
Featuring...
- Graphical user interface enables easy adjustment to most settings without the need to connect a PC
- Redesigned PCB from the ground up
- Simplified setup allows you to install and drive immediately
- Shift quality improvements result in consistent, excellent, OEM-quality shift feel
- Compatible with aftermarket torque converters.
Gen2: A New Shift in Design
Introducing the all-new Gen2 Quick 2 transmission controller from US Shift. When we set out to redesign the Quick lineup, we didn't just want to give it a simple iterative refresh. We went back to the drawing board for a complete overhaul and the resulting new design has improved each controller's functionality, ease of use, power efficiency, diagnostic abilities, and more.
Display
The new feature that stands out the most on the Gen2 is our new OLED user interface display. It lights up bright enough to be seen in daylight and retains excellent contrast. The OLED display also features a wide viewing angle, making it ideal for mounting below or to the side of the driver position without suffering wash-out. It has a much wider temperature range than standard LCD displays, meaning it will continue to function whether you're over-landing in the sweltering heat of Moab or the frigid tundras of Alaska.
(Note: The color of the display depends on availability and is subject to change. Currently, we are using white displays.)
User Interface
Using the Gen2's new UI is a breeze. The home screen gives you real-time info on things like PRNDL position, currently-commanded gear, speed, configuration table in use, and any fault codes that may appear. To access the main menu, simply turn the knob and it will immediately appear. All of the menus and functions have been carefully crafted to be easily understood and adjusted. Most of the adjustments that can be made using a computer with our Shiftware software can also be done from the built-in user interface. Examples include adjusting shift timing, shift firmness, torque converter clutch engagement, switching calibration tables, and adjusting the speed sensor settings, just to name a few.
Diagnostics
The Gen2 features comprehensive diagnostic tools. Each individual solenoid output is precisely monitored and error messages are more specific, taking you directly to the problem. And advanced diagnostics data can be accessed directly through the UI's menu instead of having to connect the controller to a PC. These improvements makes installation and troubleshooting easier than ever before.
Design
The newly redesigned Gen2 controllers feature a new circuit board which is more power efficient and runs cooler thanks to advanced thermal management, improving reliability. Additional protection circuitry prevents controller damage which could be caused by accidental miss-wiring. We've also added a robust, high-temperature-rated EEPROM IC with error correction for storing critical data - such as tunes, settings, and learned data - which has been rated to maintain data integrity for at least 200 years. Firmware is stored in newly-enhanced flash memory with error correction code technology. And, as with our past controllers, constant power is not needed to maintain saved data, meaning power loss doesn't erase your settings and your battery won't be drained during long periods of storage.
Further PCB Improvements Include...
- Elimination of configuration jumpers. Now, functions that previously required a jumper change are changed automatically in software for easy setup.
- New outputs have been added which can be customized by the end user.
- Elimination of the external capacitor needed for the speedometer signal output.
- Improved engine RPM signal input which improves compatibility with different engine RPM signals, such as direct ignition coil connections in HEI, TFI, and breaker point ignition systems.
US Shift Transmission Control System protected by US Patents #10,100,922 & #10,767,759.
Quick 2 with wiring kit: $655
Do you own a previous generation Quick 2, Quick 1, or Opti controller with wiring already installed? You can contact us if you'd like to exchange your previous controller for a new one. We'll go over all the details specific to your build over phone or email.
Additional Prices
Wiring Information
Why Should You Choose US Shift?
California Residents Only - WARNING: Prop65 Info
Online Purchasing
Choose your transmission below to begin the kit builder wizard, which will help you choose the correct kit to purchase for your vehicle.
GM 4L60E / 4L65EGM 4L80E / 4L85EFord 4R70W / AOD-EFord E4OD / 4R100If you'd rather order by phone or email, feel free to contact us.
Quick 2 Installation Manuals
We believe that the more you know about US Shift products, the more you will like them, so we encourage you to download and inspect our manuals and tuning software before you buy our products. Feel free to contact us with any questions you may have.
Quick 2 installation manual for 4R70W, 4R75, and AOD-E transmissionsQuick 2 installation manual for E4OD and 4R100 transmissionsQuick 2 installation manual for 4L80E and 4L85E transmissionsQuick 2 installation manual for 4L60E, 4L65E, and 4L70E transmissions
